Operation Guide

87
Routine Maintenance
3
Insert a new staple cartridge into the staple case.
2
1
3
1. Insert a new staple cartridge.
2. Press the spring-loaded
case down until it clicks into
place.
3. Remove the seal holding the
staples together, by pulling
it straight out.
• Do not remove the seal that holds the staples together before you place the staple cartridge into the
staple case.
• Only one staple cartridge can be inserted at a time.
• Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear.
4
Attach the staple case.
1. Gently push the staple case
back into the  nisher and
push down  rmly until it is
securely in place.
2. Close the front cover of the
 nisher.
When closing the front cover of the  nisher, be careful not to get your  ngers caught, as this may
result in personal injury.
After the cover is closed, the stapler unit may automatically perform a “dry” stapling operation to reposition
the staples.