Guide for Mac
Table Of Contents
- Preface
- How To Use This Manual
- Legal Notices
- Product Name
- FCC (Federal Communications Commission)
- Laser Safety
- International ENERGY STAR Program
- IPv6 Ready Logo
- Information Security Standard (IEEE 2600)
- Copyright
- Third Party Software
- The Software Subjected to Other Conditions
- Disclaimers
- Legal Limitations on the Usage of Your Product and the Use of Images
- Users in the U.S.A.
- Users in Canada
- Utilisation au Canada
- Super G3
- Important Safety Instructions
- Installation Location and Handling
- Backing Up/Exporting Data
- Parts and Their Functions
- Main Power and Energy Saver Key
- Specifications
- Main Unit
- Feeder (DADF-AG1)
- Cassette Feeding Unit-AF1
- Envelope Feeder Attachment-D1
- Paper Deck Unit-B2
- Staple Finisher-G1
- Booklet Finisher-G1
- External 2/3 Hole Puncher-B2
- Inner Finisher-D1
- Inner Finisher Additional Tray-A1
- Inner 2/3 Hole Puncher-A1
- Inner 2Way Tray-H1
- Copy Card Reader-F1
- Super G3 FAX Board-AP1
- Send Function
- Network Environment
- Printer Settings
- CANON imageRUNNER ADVANCE 4251/4245/4235/4225 SERIES LIMITED
- TERMS OF imageWARE REMOTE SERVICE
- TERMS OF Content Delivery System
15
Super G3
Super G3 is a phrase used to describe the new generation of fax machines that use ITU-T V.34 standard 33.6
Kbps* modems. Super G3 High Speed Fax machines allow transmission times of approximately 3 seconds* per
page which results in reduced telephone line charges.
* Approximately 3 seconds per page fax transmission time based on CCITT/ITU-T No.1 Chart, (JBIG,
Standard Mode) at 33.6 Kbps modem speed. The PSTN (Public Switched Telephone Network) currently
supports 28.8 Kbps modem speeds or slower, depending on telephone line conditions.
NOTE
The fax function is available only if the FAX Board is installed.