Guide for Mac
Table Of Contents
- Preface
- How To Use This Manual
- Legal Notices
- Product Name
- FCC (Federal Communications Commission)
- Laser Safety
- International ENERGY STAR Program
- IPv6 Ready Logo
- Information Security Standard (IEEE 2600)
- Copyright
- Third Party Software
- The Software Subjected to Other Conditions
- Disclaimers
- Legal Limitations on the Usage of Your Product and the Use of Images
- Users in the U.S.A.
- Users in Canada
- Utilisation au Canada
- Super G3
- Important Safety Instructions
- Installation Location and Handling
- Backing Up/Exporting Data
- Parts and Their Functions
- Main Power and Energy Saver Key
- Specifications
- Main Unit
- Feeder (DADF-AG1)
- Cassette Feeding Unit-AF1
- Envelope Feeder Attachment-D1
- Paper Deck Unit-B2
- Staple Finisher-G1
- Booklet Finisher-G1
- External 2/3 Hole Puncher-B2
- Inner Finisher-D1
- Inner Finisher Additional Tray-A1
- Inner 2/3 Hole Puncher-A1
- Inner 2Way Tray-H1
- Copy Card Reader-F1
- Super G3 FAX Board-AP1
- Send Function
- Network Environment
- Printer Settings
- CANON imageRUNNER ADVANCE 4251/4245/4235/4225 SERIES LIMITED
- TERMS OF imageWARE REMOTE SERVICE
- TERMS OF Content Delivery System
16
Important Safety Instructions
Please read these "Important Safety Instructions" thoroughly before operating the machine. As these instructions are intended
to prevent injury to the user or other persons or destruction of property, always pay attention to these instructions. Also, since
it may result in unexpected accidents or injuries, do not perform any operation unless otherwise speci ed in the manual.
Improper operation or use of this machine could result in personal injury and/or damage requiring extensive repair that may
not be covered under your Limited Warranty.
Installation
• Never block the ventilation slots and louvers on the machine. These openings are provided for proper ventilation
of working parts inside the machine. Blocking these openings can cause the machine to overheat. Never place
the machine on a soft surface, such as a sofa or rug.
• Do not install the machine in the following locations:
• A damp or dusty location
• A location near water faucets or water
• A location exposed to direct sunlight
• A location subject to high temperatures
• A location near open ames
• Do not install the machine near alcohol, paint thinner, or other ammable substances. If ammable substances
come into contact with electrical parts inside the machine, it may result in a re or electrical shock.
• Do not place the following items on the machine. If these items come into contact with a high-voltage area inside
the machine, it may result in a re or electrical shock.
If these items are dropped or spilled inside the machine, immediately turn OFF the main power switch, and
disconnect the power cord from the power outlet. Then, contact your local authorized Canon dealer.
• Necklaces and other metal objects
• Cups, vases, owerpots, and other containers lled with water or liquids
• Do not install the machine in unstable locations, such as unsteady platforms or inclined oors, or in locations
subject to excessive vibrations, as this may cause the machine to fall or tip over, resulting in personal injury.
• Do not remove the machine's leveling feet after the machine has been installed, as this may cause the machine to
fall or tip over, resulting in personal injury.