Operation Guide

179
Troubleshooting
Q&A
34
When a fax fails to be sent, both
the TX Report and the Fax TX
Report are output. Is there a way to
not output the Fax TX Report?
Disable the output function for
the Fax TX Report. Specify the
following settings.
■
Disabling output of the Fax TX
Report:
1. Press (Settings/Registration).
2. Press [Function Settings]  [Send] 
[Fax Settings].
3. Press [Fax TX Report]  [Off]  [OK].
Additional Information
For more information, see e-Manual >
Settings/Registration.
35
How do I print the data received
from specific destinations only?
You can set the Store/Print
Received File mode in Forwarding
Settings to print the data received
from specific destinations only.
■
Printing for Specific
Destinations Only
1. Press (Settings/Registration).
2. Press [Function Settings]  [Receive/
Forward]  [Common Settings].
3. Press [Forwarding Settings] 
[Register]  specify the destinations in
[Conditions].
4. Set <Store/Print Received File> to ‘On’ 
press [OK]  [Close].
■
Forwarding to the Confidential
Fax Inbox for Other
Destinations
1. Press (Settings/Registration).
2. Press [Function Settings]  [Receive/
Forward]  [Common Settings].
3. Press [Forwarding Settings]  [Forward
w/o Conditions]  specify the
Confidential Fax Inbox as the forwarding
destination.
4. Press [OK]  [Close].
Additional Information
•
If the Fax Memory Lock is being used,
received data is stored in the Memory RX
Inbox without being printed.
•
For more information, see e-Manual >
Settings/Registration.