Operation Guide

65
Routine Maintenance
Adjusting a Paper Drawer to Hold a Di erent Paper Size
If you want to load a di erent size paper into a paper drawer, follow the procedure described below to adjust the paper drawer
guides.
When handling paper, take care not to cut your hands on the edges of the paper.
Only the paper drawers can be adjusted to hold di erent paper sizes.
Adjusting a Paper Drawer
1
Remove the paper loaded in the paper drawer.
1. Press the open button on
the paper drawer for which
you want to adjust the paper
size.
2. Grip the handle, and pull
out the paper drawer until it
stops.
3. Remove all of the remaining
paper.
2
Adjust the position of the paper drawer guides.
1. Slide the left guide while
squeezing it on the top to
align it with the mark for the
desired paper size.
2. Slide the front guide while
squeezing it on the top to
align it with the mark for the
desired paper size.
Slide the guides until they click into place. If the left guide and front guide are not aligned correctly, the
paper size will not correctly appear on the touch panel display. It is also necessary to adjust the guides
correctly to avoid causing a paper jam, dirty prints, or making the inside of the machine dirty.