Setup Guide

12
Operations Required to Use the Machine
1
Logging In from a
Computer
To log in as the administrator using the Remote UI,
enter the System Manager ID and System PIN as
follows:
System Manager ID
7654321
System PIN
7654321
The default setting for both the System Manager ID and System
PIN is ‘7654321’. We recommend that you change the password
after logging in to the machine.
• To log in as the administrator using the Remote UI, you must
specify the network connection settings in advance. For
instructions on specifying the network connection settings,
see “Connecting to the Network,” on p. 13.
• If you are using a login service, see e-Manual > MEAP.
• For information on necessary system environment and
preparation to start the Remote UI, see e-Manual > Remote
UI.
In this example, the default System Manager ID and System
PIN are used to log in.
1
Start the Web browser on your computer.
2
Enter ‘http://<IP address or host name of the
machine>’ in [Address].
3
Enter the System Manager ID and System PIN →
click [Administrator Login].
[System Manager ID]: 7654321
[System PIN]: 7654321
You are now logged in to the machine as an administrator.
Next, refer to Chapter 2, ”Starting to Use the Various Functions of
the Machine” to specify the settings for using each function.
When you have finished specifying settings and performing
operations, press [Log Out] to log out.