Setup Guide

15
Operations Required to Use the Machine
1
6
Press [Ethernet Driver Settings].
If the desired setting is not displayed, press or to scroll to
the desired setting.
7
Press [On] for <Auto Detect> → [OK].
The interface settings are now specified. Next, set the
communication environment for the machine and the computers
on the network.
8
Press [SNMP Settings].
9
Press [On] for <Use SNMP v. 1> → [Dedicated
Comm. Settings].
10
Specify the following settings → press [OK].
In this example, the following settings are specified:
<Dedicated Community>: [On]
<MIB Access Permission>: [Read Only]
11
Press [On] for <Get Printer Mgmt Info from Host> →
[Next].