Setup Guide

32
Starting to Use the Various Functions of the Machine
2
Sending an E-Mail Message or I-Fax
The scanned data is sent to a destination registered in “Storing
New Addresses,” on p. 30 as an e-mail attachment.
1
Place your originals.
2
Press [Address Book].
3
Select [planning dept.] → press [OK].
4
Change the settings as necessary.
5
Press (Start).
If the [Set SMTP Authentication] screen is displayed, enter the
user name and password → press [OK].
If the <Original Size> screen is displayed, specify the size of the
original → press [OK].
6
Press [Start Sending].
The data is attached to the e-mail and sent.