Setup Guide

69
Starting to Use the Various Functions of the Machine
2
4
Specify the page settings, finishing modes, etc. →
click [OK].
The default setting for [Print Style] is [2-sided printing].
However, for some driver versions, [1-sided printing] is the
default setting.
5
Set the range to print and the number of copies
→ click [OK].
The document is printed.
Printing Stored Data
This section describes the procedure for printing
files that are stored in the Advanced Box of another
imageRUNNER ADVANCE series machine on the
network.
Preparations for Printing
To print stored files, you must specify the following settings:
󱄌 Mail Box
[Store Location Display Settings]
<Mail Box>: [On]
󱄌
Advanced Box
[Store Location Display Settings]
<Advanced Box/Network>: [On]
󱄌
Network
Server Settings
[Open to Public]: [By SMB]
[SMB Server Settings]
<Use SMB Server>: [On]
[Server Name]: SERVER
Client Settings
[Store Location Display Settings]
<Advanced Box/Network>: [On]
[Network Place Settings]
[Name]:images
<Protocol>: [SMB]
[Location]: \\192.168.1.23\share
[Protocol for External Reference]
<SMB>: [On]
󱄌
Memory Media
[Store Location Display Settings]
<Memory Media>: [On]
[Use MEAP Driver for External USB Device]: [Off]
[Use Scan/Print Function]
<Use Scan Function>: [On]
<Use Print Function>: [On]
For more information on the settings required when preparing
for printing, see “Preparations for Scanning,” on p. 58.