Setup Guide
78
Using the System Options/MEAP Applications
3
Installing the MEAP
Applications Using the
Remote UI (Manual)
You can install MEAP applications in the machine using the
Remote UI.
• The maximum number of MEAP applications that can be
installed is 19.
• The maximum amount of hard disk space allocated to install
MEAP applications is 1 GB.
• There may be other system requirements for installation,
depending on the MEAP application. For more information, see
the manual provided with each MEAP application.
1
From the portal page of the Remote UI, click
[Settings/Registration] → [License/Other] →
[Register/Update Software].
2
Click [Manual Installation].
3
Click [Browse] → select the license file and the
application file to install → click [Next].
License File: A file with the ‘lic’ extension.
Application File: A file with the ‘jar’ extension.
• You cannot install only license files.
• When installing a MEAP application, make sure you specify the
license file. You cannot install the application without specifying
the license file.
You can also specify the file path by entering it directly.
4
Confirm the information displayed on the install
confirmation page → click [Yes].
Depending on the MEAP application, a software license
agreement screen may be displayed. Confirm the information
displayed on the screen → click [Accept].
If you are installing a new MEAP application, the following
information is displayed on the screen.
• Application Information
• License Information
The following information is displayed when you overwrite a
MEAP application.
• Current Application Information
• Application Information after Overwrite
Installation will start after the message <Installing... Please wait.>
appears again. After the installation, click [Manual Installation] to
display the Manual Installation screen.
To use the installed MEAP application, you must start the MEAP
application. (See “Starting the MEAP Applications,” on p. 79.)