Setup Guide

83
Using the System Options/MEAP Applications
3
Managing by Using the
Remote UI
You can display the installation logs and test
communication using the Remote UI.
• Multiple users cannot use the Register/Update Software function
at the same time.
• If another user is logged in to SMS (Service Management
Service), you cannot use the Register/Update Software function
from the Remote UI.
• If you perform one of the following operations, you cannot use
“Register/Update Software” from the Remote UI for a certain
period of time:
• If you close the Web browser without pressing [Portal] or [Log
Out], when the Remote Login Service for SMS is set.
• If you close the Web browser without pressing [Portal], when
the Remote Login Service for SMS is not set.
• If you close the Web browser without pressing [Log Out from
SMS], [To Remote UI], or [Log Out] for SMS.
Displaying the Installation/
Update Log Using the
Remote UI
You can check the installation logs of the system options/
MEAP applications and the update log of the firmware.
1
From the portal page of the Remote UI, click
[Settings/Registration] → [License/Other] →
[Register/Update Software].
2
Click [Display Logs/Communication Test].
3
From the Log View drop-down list, select [Update
Logs] → click [Switch].
The installation logs of the system options and MEAP
applications are displayed.