Setup Guide

86
Using the System Options/MEAP Applications
3
Using the Remote UI to
Update (Delivery)
You can update the firmware of the machine from
the Remote UI.
• To perform this procedure, you need the firmware data that is
distributed separately.
• Multiple users cannot use the Register/Update Software function
at the same time.
• If another user is logged in to SMS (Service Management
Service), you cannot use the Register/Update Software function
from the Remote UI.
• If you perform one of the following operations, you cannot use
“Register/Update Software” from the Remote UI for a certain
period of time:
• If you close the Web browser without pressing [Portal] or [Log
Out], when the Remote Login Service for SMS is set.
• If you close the Web browser without pressing [Portal], when
the Remote Login Service for SMS is not set.
• If you close the Web browser without pressing [Log Out from
SMS], [To Remote UI], or [Log Out] for SMS.
1
From the portal page of the Remote UI, click
[Settings/Registration] → [License/Other] →
[Register/Update Software].
2
Click [Manual Update].
3
Click [Browse] → select the firmware to use for the
update → click [Next].
4
Confirm the information displayed on the update
confirmation page → click [Yes].
The machine now has the latest firmware applied. When the
message <The firmware is updated. Restart the device.> appears,
restart the machine.