User Manual

85
Routine Maintenance
17
Load the paper stack into the paper deck, and then lower the feeding support
roller.
1. Load the paper stack.
2. Lower the feeding support
roller.
When loading paper, take care not to cut your hands on the edges of the paper.
• To load paper larger than LGL,  rst close the paper deck to raise the inside lifter, open the paper deck, and
then load the paper. If you try to load paper larger than LGL when the inside lifter is at its lowest position,
the paper may not be loaded properly, and paper jams may occur.
• Never place paper or any other items in the empty part of the paper deck. Doing so may lead to a
malfunction of the machine.
When loading paper, make sure that the height of the paper stack does not exceed 13/16” (20 mm). If the
height of the paper stack exceeds 13/16” (20 mm), the edges of the paper stack may become curled or
creased, and poor print quality may result.
18
Place a magnet label indicating the new paper size on the POD Deck Lite-A1.
19
Close the paper deck.
The inside lifter automatically ascends, and prepares the paper deck for feeding.
When closing the paper deck, be careful not to get your  ngers caught, as this may result in
personal injury.