User manual
Printing procedure
9. Send the print job.
• Printing from Windows (→P .91)
• Printing from Mac OS X (→P .92)
• Printing from Mac OS 9 (→P .94)
Start printing.
Note
• Steps 6 and 7 are not required, if a barcode has been printed on the roll and you have activated
automatic detection of the remaining roll paper . The paper type and amount of paper left are
automatically detected.
• Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading
edge.
When printing quality is most important, we recommend setting T rimEdge Reload to On so that the
paper edge is automatically cut before printing.
• For details on supported sizes and types of the roll that can be loaded, see “Paper Sizes” or the Paper
Reference Guide . ( → P .109) ( → P .103)
• Clean the platen after you have used up a roll. ( → P .627)
• When a roll has been advanced, do not pull it out by force. This will prevent the paper from being
advanced.
If you accidentally pull out the paper , hold the Stop/Eject button to enable feeding again.
( → P .1 19 )
86 Basic Printing W orkow