User manual
Printing CAD Drawings
HP-GL/2 Printing
This printer supports the original Canon GARO printer control language as well as HP-GL/2 and HP
R TL( *1 ) emulation.( *2 ) When printing from applications that support HP-GL/2 output, specify HP-GL/2 in
the application’ s plotter output settings.
Note
• For instructions on conguring these settings, refer to the software documentation.
The printer automatically switches to the corresponding processing depending on whether a GARO,
HP-GL/2, or HP R TL job is received. Congure the optional settings for HP-GL/2 emulation on the printer
control panel. ( → P .51)
This printer can emulate the following printers using HP-GL/2 emulation.
Emulated Printers
Canon W3000 and W3050( *3 )
Hewlett-Packard Designjet 450c, Designjet 750c Plus, and Designjet 750c
*1: HP-GL/2: Hewlett-Packard Graphics Language 2; HP R TL: Hewlett-Packard Raster T ransfer Language
*2: It may not be possible to print jobs with excessively large amounts of data correctly .
*3: Layout templates are not supported.
W orking With V arious Print Jobs 201