User manual

Messages regarding ink
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work correctly if you use
rell ink tanks.
The rell ink tank can no longer be used. See the
section “Ink level detection” and take the appropriate
action.
( → P .679)
Ink Level: Check
Cause Corrective Action
Not much ink is left. Prepare a new Ink T ank .
W e recommend replacing the Ink T ank with a new Ink
T ank at this point if you plan to print large-format or
high-quantity jobs.
No ink tank loaded.
Cause Corrective Action
There is no Ink T ank of the indicated color in the
printer .
Load or reload the Ink T ank .
( → P .615)
There is a problem with the Ink T ank . Replace it with a new Ink T ank .
( → P .615)
Ink tank error .
Cause Corrective Action
The Ink T ank in the printer is incompatible. Load an Ink T ank specied for use with the printer .
( → P .615)
The Display Screen indicates the system is lling with ink
Cause Corrective Action
When the printer was turned of f previously , some
cleaning operation was terminated.
W ait until the system has been lled with ink. This
process may take about ten minutes.
Error Message 695