Basic Guide

Insert the Holder Stopper from the left in the Roll

Holder as shown. Holding it at the position shown

(b), push it firmly in until the flange (a) of the Holder

Stopper touches the roll. Lock the Holder Stopper

lever (c) by pushing it down toward the shaft side.

Loading Rolls in the Printer

Follow these steps to load rolls in the printer.

Note

• Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these areas

are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.") →P.39

Press the Load button.

Press ▲ or ▼ to select Load Roll Paper, and then press the OK button.

Note

• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.

Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next step.

Loading Rolls in the Printer

iPF760

Basic Guide

Handling Paper Handling rolls