Operation Manual

1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
1-13
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
3. Press [Hook].
You can also lift the optional handset instead.
NOTE
Make sure to confirm the dial tone before entering a fax number.
If you enter the number before the dial tone can be heard, the
call may not be connected, or the wrong number may be dialed.
4. Use the numeric keys to dial the required
information service.
5. When the recorded message of the
information service answers, press [Tone] to
switch to tone dialing.
If you pressed [Hook] in step 3, you can pick up the optional
handset if you need to talk to the other party.
6. Use the numeric keys to enter the numbers
requested by the information service.
7. If you want to receive faxes, press [Start].
If you are using the optional handset or the external telephone,
hang up the handset after pressing [Start].
■ Dialing an Overseas Number (With
Pauses)
When you dial or register an overseas number, you may need to
insert a pause within the number.
1. Set documents.
2. Press [SEND]/[FAX].
3. Confirm that <FAX> is displayed, then press
[OK].
For the iR1022F, skip this step.
4. Adjust any necessary settings for your
documents.
5. Use the numeric keys to dial the international
access code.
For details on international access codes, contact your local
telephone company.