Operation Manual

1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
1-14
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
6. If necessary, press [Recall/Pause]/[Redial/
Pause] to insert a pause.
– The letter <p> is displayed between the numbers.
– You can enter successive pauses within the fax number to
make the pause time longer.
– You can change the length of a pause inserted within the fax
number in the <PAUSE TIME> menu. The default setting is
four second.
7. Use the numeric keys to dial the country
code, the area code, and the fax/telephone
number of the recipient.
8. Press [Recall/Pause]/[Redial/Pause] to enter
a pause at the end of the number.
– The letter <P> appears at the end of the fax number.
– Pauses entered at the end of fax numbers are always 10
seconds long.
9. Press [Start].
When you set the documents on the platen glass, press [ ] or
[ ] to select the document size, then press [Start] for each
document. When scanning is complete, press [OK] to start
sending.