User Guide

Supplement to the Installation Procedure
[1]
[2]
A grounding wire is attached to the IP cover of the iR machine's IP PCB. When fitting the LAN cover in place,
be sure to remove the screw [1] used for the grounding wire, and then tighten the screw to keep both the grounding
wire and the LAN cover [2] together in place.
1. Additional Contents
The following ferrite core [1] will be added to the existing contents.
2. Points to Note When Attaching the LAN Cover
[1]
3. Fitting the Ferrite Core
Fit the ferrite core [1] to the USB cable [2].
To avoid noise, be sure that the core is fitted to the USB cable as close as possible to the machine.
[1]
[2]
PUB. F-IM-6539-000
PRINTED IN JAPAN or CHINA