Service manual

Chapter 3
3-9
3.5 Parts Replacement Procedure
3.5.1 Main Controller PCB
3.5.1.1 Removing the Rear Cover
0010-8701
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
F-3-14
3.5.1.2 Removing the Left Cover (Rear)
0010-8702
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the three screws [1], and then detach the left cover (rear).
F-3-15
3.5.1.3 Removing the RAM Cover
0010-8714
iR2016 / iR2020 / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the RAM cover [2].
F-3-16
3.5.1.4 Removing the SDRAM
0010-8715
iR2016 / iR2020 / iR2016i / iR2020i
3.5.1.5 Removing the LAN Cover
0010-8716
iR2016 / iR2020 / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the LAN cover [2].
F-3-17
3.5.1.6 Removing the IP Cover
0010-8718
iR2016J /
1) Release SOFT ID cable [1] from the cable clamp [2].
F-3-18
2) Release a claw [1] of cable guide and detach the cable guide [2] upward.
F-3-19
3) Open a core [1].
F-3-20
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[2]
[1]