Service manual

Chapter 3
3-10
4) Remove the two screws [1], and then detach the flexible cable guide [2].
F-3-21
5) Remove the 10 screws [1], and then detach the IP cover [2].
F-3-22
3.5.1.7 Removing the IP Cover
0010-8717
iR2016 / iR2020 / iR2016i / iR2020i
1) Remove a connector [1] of IP-LAN cable and a cable clamp [2].
F-3-23
2) Release SOFT ID cable [1] from the cable clamp [2].
F-3-24
3) Release a claw [1] of cable guide and detach the cable guide [2] upward.
F-3-25
4) Open a core [1].
F-3-26
5) Remove the two screws [1], and then detach the flexible cable guide [2].
F-3-27
6) Remove the 10 screws [1], and then detach the IP cover [2].
[1]
[2]
[1]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[1]
[2]