Service manual

Chapter 4
4-15
F-4-35
4.4.2.3 Removing the Right Cover (Upper)
0010-6091
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the screw [1], and then detach the right cover (upper).
F-4-36
4.4.2.4 Removing the Left Cover (Rear)
0010-6092
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the three screws [1], and then detach the left cover (rear).
F-4-37
4.4.2.5 Removing the Reader Rear Cover
0010-6093
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the copyboard cover (or ADF).
2) Remove the screw, and then detach the small cover [2].
F-4-38
3) Remove the screw [1], and then disconnect the ground cable [2] of the
ADF harness.
4) Disconnect the four connectors [3], and then remove the ADF harness [4].
F-4-39
When installing the ADF harness [4], fit the harness band [5] in the
groove in the reader rear cover.
5) Remove the four screws [1], and then detach the reader rear cover [2].
F-4-40
4.4.2.6 Removing the Copyboard glass
0010-6094
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the copyboard cover (or ADF).
2) Remove the two screws [1], remove the glass retainer [2], and then
remove the copyboard glass [3].
[2]
[3]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[3]
[4]
[5]
[1]
[2]