Service manual

Chapter 7
7-6
7.2 Detecting Jams
7.2.1 Delay Jams
7.2.1.1 Delay Jam in Pickup Assembly
0010-4883
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Delay Jam in Pickup Assembly
The registration sensor cannot detect the leading edge of paper within the jam detection time interval after paper pickup started.
T-7-2
7.2.1.2 Delay Jam in Delivery Assembly (Paper Leading Edge Jam at Delivery Sensor/Wound Paper Jam at Fixing
Assembly)
0011-0712
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Paper Leading Edge Jam at Delivery Sensor
The delivery sensor cannot detect presence of paper within the prescribed time after the registration clutch has been turned on.
T-7-3
Wound Paper Jam at Fuser
The delivery sensor has detected absence of paper within the prescribed time after it detected presence of paper (within the prescribed
time after the registration clutch had been turned on).
T-7-4
7.2.2 Stationary Jams
7.2.2.1 Stationary Jam in Pickup Assembly
0010-4884
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Stationary Jam in Pickup Assembly
The registration sensor does not detect absence of paper within the prescribed time before the next leading edge of fed paper reaches the registration sensor.
T-7-5
7.2.2.2 Stationary Jam in Delivery Assembly (Paper Trailing Edge Stationary Jam at Delivery Sensor/Stationary Jam at
Delivery Sensor)
0011-0733
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Paper Trailing Edge Stationary Jam at Delivery Sensor
The delivery sensor cannot detect absence of paper within the prescribed time after the registration sensor has been turned off.
T-7-6
Stationary Jam at Delivery Sensor
The delivery sensor cannot detect absence of paper within the prescribed time after it has detected the leading edge of paper.
T-7-7
7.2.3 Other Jams
7.2.3.1 Door Open Jam
0010-4886
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Door Open Jam
The door is opened when paper to be printed is in the paper feed path.
7.3 Cassette Pick-Up Unit
7.3.1 Overview
0010-4887
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
The paper picked up from the cassette is fed to the registration roller using the vertical path roller driven by the main motor (M204). The registration roller is not
rotating when paper reaches there, so an arch is formed at the leading of the paper to prevent skewing. The DC controller PCB turns on the registration clutch
(CL203) at the prescribed timing to transfer the main motor rotation to the registration roller, thus feeding the paper to the delivery tray through the transfer, sepa-
Sensor/Solenoid
Registration sensor (SR209)
Pickup solenoid (SL202)
Sensor/Registration clutch
Delivery sensor (SR203)
Registration clutch (CL203)
Sensor/Registration clutch
Delivery sensor (SR203)
Registration clutch (CL203)
Sensor
Registration sensor(SR209)
Sensor
Registration sensor (SR209)
Delivery sensor (SR203)
Sensor
Delivery sensor (SR203)