Service manual

Chapter 9
9-8
F-9-35
9.4.2.10 Removing the IP Cover
0011-0619
iR2016J /
1) Release SOFT ID cable [1] from the cable clamp [2].
F-9-36
2) Release a claw [1] of cable guide and detach the cable guide [2] upward.
F-9-37
3) Open a core [1].
F-9-38
4) Remove the two screws [1], and then detach the flexible cable guide [2].
F-9-39
5) Remove the 10 screws [1], and then detach the IP cover [2].
F-9-40
9.4.2.11 Removing the Image Processor PCB Mount
0011-0630
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Disconnect the two reader flexible cables [1]. Release the harness [2] from
the wire saddles [3]. Remove the two screws [4], and then detach the
flexible cable cover [5].
[1]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[1]
[2]