Service manual

Chapter 9
9-9
F-9-41
2) Turn over the reader flexible cable cover [1], and then secure to the back
of the reader temporarily using a screw [2].
F-9-42
3) Disconnect all connectors and remove the five screws [2], then remove the
image processor PCB with the PCB mount.
F-9-43
9.4.2.12 Removing the Fixing Drive Unit
0011-0631
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Release the claw [1] on the gear cover, and then remove the gear cover [2]
by sliding it in the direction of the arrow.
F-9-44
2) Release the gear stopper [1], and then remove the gear [2].
F-9-45
3) Remove the four screws [1], and then remove the fixing drive unit [2].
[5]
[1]
[4]
[3]
[2]
[2]
[1]
[1] [2]
[1]
[1]
[2] [1]
[2] [1]