Service manual

Chapter 9
9-10
F-9-46
9.4.3 Power Supply Unit
9.4.3.1 Removing the Rear Cover
0010-9965
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
F-9-47
9.4.3.2 Removing the Right Cover (Lower)
0010-9967
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover.
2) Remove the five screws [1]. Remove the two hooks [2], and then detach
the right cover (lower) [3].
F-9-48
9.4.3.3 Removing the Delivery Tray
0010-9968
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the delivery tray [2].
F-9-49
9.4.3.4 Removing the Main Power Supply PCB
0010-9969
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the connector [1] and screw [2], and then remove the power
supply PCB [3].
F-9-50
F-9-51
9.4.4 Control Panel
9.4.4.1 Removing the Reader Front Cover
0010-9978
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the copyboard cover (or ADF).
2) Remove the two screws [1], and then detach the reader front cover [2].
F-9-52
[2] [2]
[2] [2]
[3]
[1]
[1]
[2]
[1]
[2]
[3]
[1]
[1] [2]
[1]
[2]
[2] [2]
[2]
[1]
[2]