Service manual

Chapter 9
9-11
9.4.4.2 Removing the Operation Panel Unit
0010-9979
iR2016J / iR2016 / iR2020 /
1) Remove the two screw [1], and then detach the left cover [2] of the
operation panel unit.
F-9-53
2) Remove the flat cable [1] and two screws [2], and then remove the
operation panel unit [3].
F-9-54
9.4.5 DC Controller PCB
9.4.5.1 Removing the Rear Cover
0010-9963
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
F-9-55
9.4.5.2 Removing the DC Controller PCB
0010-9964
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Disconnect all connectors [1]. Remove the four screws [2], and then
remove the DC controller PCB [3].
F-9-56
9.4.6 Option Power Supply PCB
9.4.6.1 Removing the Rear Cover
0011-0413
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
F-9-57
9.4.6.2 Removing the Right Cover (Lower)
0011-0414
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover.
2) Remove the five screws [1]. Remove the two hooks [2], and then detach
the right cover (lower) [3].
F-9-58
9.4.6.3 Removing the Delivery Tray
0011-0415
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the delivery tray [2].
[2]
[1]
[3]
[2]
[1]
[1]
[2]
[1]
[1] [2][2]
[2][2] [1]
[3]
[1]
[2]
[1]
[2]
[3]
[1]