Service manual

Chapter 9
9-12
F-9-59
9.4.6.4 Removing the Option Power Supply PCB
0011-0416
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Disconnect the connector (J16) [1] on the power supply PCB.
F-9-60
2) Disconnect the connector (J53) [1] on the power supply PCB. Remove the
three screws [2], and then remove the option power supply PCB [3].
F-9-61
9.4.7 HVT PCB
9.4.7.1 Removing the Rear Cover
0010-9971
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
F-9-62
9.4.7.2 Removing the Right Cover (Lower)
0010-9972
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover.
2) Remove the five screws [1]. Remove the two hooks [2], and then detach
the right cover (lower) [3].
F-9-63
9.4.7.3 Removing the Delivery Tray
0010-9973
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the delivery tray [2].
F-9-64
9.4.7.4 Removing the Main Power Supply PCB
0010-9974
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the connector [1] and screw [2], and then remove the power
supply PCB [3].
F-9-65
[1] [2]
[1]
[2][1][2]
[2] [3]
[1]
[2]
[1]
[2]
[3]
[1]
[1] [2]
[1]
[2]
[2] [2]