Service manual

Chapter 14
14-5
#PRINT
NUMERIC
01: - 30: Not used
31: 50 0 to 100, one unit = 0.1
mm
Top registration adjustment (manual paper feed tray)
32: 50 0 to 100, one unit = 0.1
mm
Top registration adjustment (cassette)
33: 50 0 to 100, one unit = 0.1
mm
Top registration adjustment (duplex unit)
34: 100 0 to 200, one unit = 0.1
mm
Left-end registration adjustment (manual paper feed tray)
35: 100 0 to 200, one unit = 0.1
mm
Left-end registration adjustment (cassette 1)
36: 100 0 to 200, one unit = 0.1
mm
Left-end registration adjustment (cassette 2)
37: 100 0 to 200, one unit = 0.1
mm
Left-end registration adjustment (cassette 3)
38: 100 0 to 200, one unit = 0.1
mm
Left-end registration adjustment (cassette 4)
39: 100 0 to 200, one unit = 0.1
mm
Left-end registration adjustment (duplex unit)
40: 6 -30 to 0, 1 unit = 5 deg C Target fixing temperature adjustment (multi)
41: 6 -30 to 0, 1 unit = 5 deg C Target fixing temperature adjustment (cassette 1)
42: 6 -30 to 0, 1 unit = 5 deg C Target fixing temperature adjustment (cassette 2)
43: 6 -30 to 0, 1 unit = 5 deg C Target fixing temperature adjustment (cassette 3)
44: 6 -30 to 0, 1 unit = 5 deg C Target fixing temperature adjustment (cassette 4)
45: 15 0 to 30, 1 unit = 0.4% Fixing film speed adjustment (manual paper feed tray)
46: 15 0 to 30, 1 unit = 0.4% Fixing film speed adjustment (cassette)
47: - 50: Not used
#PRINT CST U1 0 0: G_LTR Paper size group U1 special, standard-size paper entry
29: A-LTR
31: G-LTR
40: 8K
U2 0 0: FLSP Paper size group U2 special, standard-size paper entry
24: FLSP
26: OFI
27: E-OFI
28: B-OFI
36: A-OFI
37: M-OFII
39: 16K
U3 0 0: G-LGL Paper size group U3 special, standard-size paper entry
25: AFLS
32: GLTRR
30: ALTRR
35: FORIO
34: G-LGL
#NETWORK Not used.
#CODEC Not used.
#SYSTEM
No. Initial setting Range of
setting
Function
#SYSTEM SW SW01- SW02 not used
SW03 00001000 Import/export of the user information via USB
SW04 - SW50 not used
#SYSTEM
NUMERIC
001: -100: not used
#ACC
Item Initial setting Range of setting Function
CARD 0 0 - 99999 Card reader installation setting
CC-SPSW 0 0 or 1 Control card I/F support setting
COIN 0 0 or 1 Coin vendor change setting
CONTROL 0 0 or 1 Pinter output control setting at the time of support of control card I/F
#PRINT
No. Initial setting Range setting Explanation