Service manual

Chapter 14
14-6
#COUNTER
Item Function
TOTAL total counter
PICK_UP pickup-related counter
FEEDER feeder counter
JAM jam-related counter
MISC other counter
DRBL-1 durables counter
#REPORT
Setting Function
#REPORT SW Not used
#REPORT OUTPUT SERVICE DATA LIST Output of service data list
SYSTEM DATA LIST Output of system data list
SYSTEM DUMP LIST Output of system dump list
COUNTER LIST Output of counter list
ERROR LOG LIST Output of error log list
SPEC LIST Output of spec list
SERVICE LABEL Output of service label
#REPORT NUMERIC Not used
#DOWNLOAD Download mode
#CLEAR
Item Level2 Function
TEL & USER DATA Use it to clear all areas under user registration/setting.
SERVICE DATA Use it to clear the counters (numerator), date, and start
data form the system dump list.
COUNTER Use it to clear the maintenance/parts counter data and each mode counter data.
SOFT-CNT Not used.
TYPE Use it to clear the user data and the service data by specified settings.
HST ACTIVITY Use it to clear the contents of the communications control
report.
ACCOUNT Use it to clear each print history.
JAM Use it to clear the contents of the jam history.
ERR Use it to clear the contents of the error (E code) history.
ALARM Use it to clear the contents of the alarm history.
CARD Use it to clear the control cars error data.
ERR E355 Not used.
E719 Use it to clear the management information at the time of card reader removal.
PWD Use it to clear the system administrator's password.
ALL Use it to clear all settings/registration data except the
counter (denominator, numerator).
#ROM
Item Function
MAIN Use it to indicate the version of the ROM (SYSTEM) on the image processor PCB.
MAIN2 Use it to indicate the version of the ROM (BOOT) on the image processor PCB.
OPROM Use it to indicate the version of option ROM.
ECONT Use it to indicate the version of the ROM on the DC controller PCB.
#TEST MODE [1] - [9]
Item Function
(1) DRAM [1] - [2] Data check in D-RAM
(2) SCAN TEST [1] - [8] CS automatic correction and document scan position adjustment
(3) PRINT TEST [1] - [9] Output of test prints
(4) MODEM TEST [1] - [9] modem/NCU related tests
(5) AGING TEST not used
(6) FACULTY TEST [1] - [9] Various functional tests
(0) ROLLER CLEAN Printer and ADF roller cleaning