Service manual

Chapter 14
14-9
14.3.5.3 Detailed Discussions of Bit 2
0011-1747
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Use it to enable/disable millimeter/inch conversion in sub scanning direction for images read in text/photo mode while bit 1 is set to '1'.
Scanning direction in conversion follows the Bit 2 setting of SW14.
14.3.6 SSSW-SW12
14.3.6.1 List of Functions
0011-1748
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
T-14-5
The machine will stop the ongoing communication if the transmission/reception of a single original page takes 32 min or more. To use the timer for a purpose other
than this function, refer to the tables that follow, and select an appropriate time length.
When 'do not enable' is selected using bit 7, the time-out length for a single page for all modes will depend on the setting of bit 0 and bit 1.
T-14-6
T-14-7
T-14-8
14.3.7 SSSW-SW13
14.3.7.1 List of Functions
0011-1749
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
T-14-9
14.3.7.2 Detailed Discussions of Bit 2
0011-1750
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
It converts "inch" into "mm" when transmitting the received image data.
Scanning direction in conversion follows the Bit 2 setting of SW14.
Bit Function 1 0
0 Time-out period for one page upon transmission 1 0
1 Time-out period for one page upon transmission 1 0
2 not used - -
3 not used - -
4 Time-out period for one page upon reception 1 0
5 Time-out period for one page upon reception 1 0
6 not used - -
7 Respective page timer settings for transmission and for
reception
enable do not enable
Time-Out Length for
Transmission/Reception
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
8 min 0*****00
16 min 0*****01
32 min 0*****10
64 min 0*****11
Time-Out Length for
Transmission (in text
mode)
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
8 min 1*****00
16 min 1*****01
32 min 1*****10
64 min 1*****11
Time-Out Length for
Reception
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
8 min 1*00****
16 min 1*01****
32 min 1*10****
64 min 1*11****
Bit Function 1 0
0 not used - -
1 not used - -
2 Convert "inch" into "mm" when transmitting the received
image data
convert do not convert
3 not used - -
4 not used - -
5 not used - -
6 not used - -
7 not used - -