Service manual

Chapter 14
14-18
T-14-17
Specify whether to output an image for ADF perpendicularity adjustment.
14.6.2 Numeric Parameter Functional configuration
0011-1997
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
If any operation error occurs after changing the setting value, change the setting value to the original one.
14.6.3 <024:CIS scan position during ADF scanning>
0011-3598
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Not used - -
3 Not used - -
4 Outputting an Image for ADF Perpendicularity
Adjsutment
output not output
5 Not used - -
6 Not used - -
7 Not used - -
No. Function Default Setting range Unit
001: - 023: Not used
024: CIS scan position during ADF scanning. 385 300-450 one unit=0.1mm
025: Not used
026: Distance from the standby position of CIS to the
shading start point.
22 6-48 one unit=0.1mm
027: - 030: Not used
031: Vertical scan start position adjustment 35 0-70 one unit=0.1mm
032: Horizontal scan start position adjustment 115 50-150 one unit=0.1mm
033: Vertical scan magnification correction 16 0-32 one unit=0.1%
034: Not used
035: - 036: Reader motor speed adjustment 474
037: - 040: Not used
041: Vertical scan start position adjustment (scanning
on ADF)
35 0-70 one unit=0.1mm
042: Horizontal scan start position adjustment
(scanning on ADF)
220 170-270 one unit=0.1mm
043: Horizontal scan end position correction (copy) 24 0-200 one unit=0.1mm
044: Horizontal scan end position correction
(superfine)
36 0-200 one unit=0.1mm
045: Horizontal scan end position correction (fine) 47 0-200 one unit=0.1mm
046: Horizontal scan end position correction (standard) 47 0-200 one unit=0.1mm
047: Vertical scan magnification correction (scanning
on ADF)
16 0-32 one unit=0.1%
048: Horizontal scan magnification correction
(scanning on ADF)
16 0-32 one unit=0.1%
049: - 053: Not used
054: Pickup motor speed correction (when the ADF is
used)
16 0-32 one unit=0.1%
055: - 192: Not used
193: ADF special paper, standardized size: LGL
misidentification-ready
0 0 : LEGAL
1 : FOOLSCAP
2 : M_OFFICIO
3 : A_FOOLSCAP
4 : FOLIO
5 : G_LEGAL
6 : A_OFFICIO
7 : B_OFFICIO
194: ADF special paper, standardized size: LTR
misidentification-ready
0 0 : LTR
1 : G_LTR
2 : A_LTR
195: ADF special paper, standardized size: LTR_R
misidentification-ready
0 0 : LTR_R
1 : FOOLSCAP
2 : OFFICIO
3 : E_OFFICIO
4 : G_LTR_R
5 : A_LTR_R
196: shading target value (red) 272 0-511
197: shading target value (green) 272 0-511
198: shading target value (blue) 272 0-511
199: - 350: Not used