Service manual

Chapter 14
14-20
Do not change the adjustment value extremely.
14.6.17 <054: Pickup motor speed correction (when the ADF is used) >
0011-2028
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
This menu is used to adjust the ADF pickup motor speed. If you have adjusted the ADF feed motor speed by selecting SCAN NUMERIC>48, the ADF pickup
motor speed must also be incremented/decremented by the same amount.
Do not change the adjustment value extremely.
14.6.18 <193: ADF special standard-sized paper: LGL misidentification-ready>
0011-2048
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because it is misidentified as "LEGAL").
0: LEGAL
1: FOOLSCAP
2: M_OFFICIO
3: A_FOOLSCAP
4: FOLIO
5: G_LEGAL
6: A_OFFICIO
7: B_OFFICIO
14.6.19 <194: ADF special standard-sized paper: LTR misidentification-ready>
0011-2049
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because it is misidentified as "LTR").
0: LTR
1: G_LTR
2: A_LTR
14.6.20 <195: ADF special standard-sized paper: LTR_R misidentification-ready>
0011-2051
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because it is misidentified as "LTRR").
0: LTR_R
1: FOOLSCAP
2: OFFICIO
3: E_OFFICIO
4: G_LTR_R
5: A_LTR_R
14.6.21 <196: Shading Target Value (Red)>
0011-3601
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
This is market-related measures taken to improve shadow images generated by a thick original such as a book or a folded or wrinkled original. When taking the
measures, assign the same values for R, G, and B. After changing the values, be sure to turn off the power and turn it on again.
14.6.22 <197: Shading Target Value (Green)>
0011-3602
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
This is market-related measures taken to improve shadow images generated by a thick original such as a book or a folded or wrinkled original. When taking the
measures, assign the same values for R, G, and B. After changing the values, be sure to turn off the power and turn it on again.
14.6.23 <198: Shading Target Value (Blue)>
0011-3603
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
This is market-related measures taken to improve shadow images generated by a thick original such as a book or a folded or wrinkled original. When taking the
measures, assign the same values for R, G, and B. After changing the values, be sure to turn off the power and turn it on again.
14.7 Setting of Printer Functions (PRINTER)
14.7.1 Service Soft Switch Settings (PRINTER)
14.7.1.1 SSSW-SW05
14.7.1.1.1 List of Functions
0011-1861
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
T-14-18
Bit Function 1 0
0 not used - -
1 not used - -
2 not used - -
3 not used - -
4 not used - -