Service manual

Chapter 14
14-26
- Counter clear on parts replacement
Press the numeric keypad key 0 after displaying the counter for a part just replaced, and the counter will be cleared individually.
14.11 Service Report (REPORT)
14.11.1 Report Output
0011-1028
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
The table below lists the kinds of reports that are supported.
14.11.2 System Data List
0011-1009
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Use it to check the settings associated with the service soft switch and service parameters.
F-14-3
14.11.3 System Dump List
0011-1010
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
- System Dump List
Use it to check the history of communications, both successful and error.
Item Explanation
SERVICE DATA LIST Service mode service soft switch output (SSSW, MENU, NUMERIC Param., SPECIAL, NCU, SCAN, PRINT, SYSTEM, ROM,
start date)
SYSTEM DATA LIST Service mode service soft switch output (SSSW, MENU, NUMERIC Param., SPECIAL, NCU, SCAN, PRINT, SYSTEM, ROM,
start date)
System dump list output
SYSTEM DUMP LIST Transmission count, reception count, record chart count, error count and other outputs
COUNTER REPORT Counter output
ERROR LOG LIST Jam and error history output
SPEC LIST Type setting, print speed, memory size, ROM indication, adjustment data and other outputs
SERVICE LABEL Output of an entry format for the service label affixed to the rear cover as shipped