Service manual

Chapter 15
15-1
15.1 Outline
15.1.1 Overview of Upgrade
0011-1809
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
This machine and options can be upgraded by downloading system software programs from the personal computer (hereafter called as the PC) in which a service
support tool (hereafter called SST) has been loaded.
System software programs and upgrade tools are listed in the following table:
T-15-1
15.1.2 Overview of Service Support Tool
0011-1810
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
F-15-1
When using the SST, select "#DOWNLOAD" in the service mode to place the main unit in the download mode. (The finisher need not enter the download mode.)
15.2 Making Preparations
15.2.1 Registering the System Software
0011-1866
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
System software programs to be downloaded need to be registered in the SST.
The system software programs are registered with the names listed below.
<Software Programs Preinstalled in Main Unit>
Machine name:iR2020
Unit name:
- Main controller: System
- Boot program: Boot
- PCL board: PCL
The system software registration program is explained below taking System as an example.
[Preparation]
Have the following ready:
- PC in which SSTv3.21 or later is installed
- System CD supplied with iR2020
[System Software Registration Procedure]
1) Start the PC.
2) Insert the system CD in the PC.
Type System software type Upgrade tool Remarks
SST
Main unit System (main controller)
Yes
The main controller also controls
the reader.
Boot (boot program) Yes
Option PCL (PCL printer kit-J1) Yes
Fin_U1 (Finisher-U1)
Yes
Dedicated service tool
(Downloader PCB: FY9-2034)
CPU
USB cable
RS232C
straight cable
Image processor PCB
PCL printer kit-J1
Finisher-U1
Finisher controller PCB
Main unit
Downloader
PCB
FY9-2034
PC
J303
Flash ROM
Flash ROM
CPU
Flash ROM
J918
System
software
SST
32MB ROM PCB