Service manual

Chapter 1
1-15
1.2.4 Maintenance by the User
1.2.4.1 User Maintenance Items
0011-2393
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
T-1-1
1.2.4.2 Cleaning
0011-0420
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
The parts that should be cleaned by the customer to maintain the design performance and the cleaning method are described below.
The service engineer should instruct the customer to clean the machine at regular intervals (once a month).
1. Pressure Plate
Clean the pressure plates [1] with a cloth dampened with water or neutral detergent and squeezed hard, and then wipe it with a dry soft cloth.
F-1-12
2. Document Glass/Vertical Size Plate
Clean the document glass [1] and vertical size plate [2] with a cloth dampened with water or neutral detergent and squeezed hard, and then wipe them with a dry
soft cloth.
When an ADF is installed, clean is document glass (small) [3] and glass holder [4] in the same manner.
F-1-13
3. Cleaning the Fixing Pressure Roller
If white streaks are seen on the printed paper, the fixing pressure roller can be dirty. If white streaks are seen on the printed paper, clean the fixing pressure roller
in the user mode. Be sure to clean the fixing pressure roller after replacing the toner bottle.
When cleaning the fixing pressure roller, manually feed A4 paper.
MEMO:
The time required for cleaning is about 100 seconds.
1) Press the user mode key " " to enter the user mode.
2) Using the left an right arrow keys, display the "ADJUST./CLEANING" menu.
3) Press the OK key.
4) Using the left and right arrow keys, select "FIX. UNIT CLEANING". Next press the OK key.
5) Using the left and right arrow keys, select "CLEAN PAPER PRT". Next press the OK key. A cleaning pattern will be printed.
6) Open the manual feed tray.
No. Item Maintenance cycle Remarks
[1] Pressure plate cleaning As required
[2] opyboard glass(large/small) cleaning As required
[3] Copyboard holder (jump board) As required
[4] Fixing pressure roller cleaning As required Clean every 10000 sheets
[5] Exterior cleaning As required
[6] Transfer roller cleaning As required
[7] Drum cleaning As required
[8] Toner replenishment (toner bottle
replacement)
When the relevant error code
appears
[1]
[1]
[3]
[2]
[4]