Service manual

Chapter 2
2-7
switch [2].
Supply of toner will start after the initial rotation. After a few minutes,
supply of toner finishes and the machine stops automatically.
Use the specified power supply (rated voltage -/+10% and rated current).
F-2-31
2) Place a document on the document glass, take a copy of it by supplying
paper from the cassette or manual feed tray, and check the printed image.
Also perform the following checks:
- Check whether abnormal sound is heard.
- Check the printed images at all preset magnifications.
- Check whether the document is copied normally on the specified number
of sheets.
2.2.7 Setting the Country/Region
0011-1077
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Press the following keys to display the service mode screen:
Additional Functions Key > 2 Key > 8 Key > Additional Functions Key
2) Select "# CLEAR" using the + or - key, and then press the OK key.
3) Select "TYPE" using the + or - key, and then press the OK key.
4) Using the + or - key, select the country/region type that conforms to the
communication standard used in the country/region where the machine is
used.
5) Press the OK key. When "Please Wait" disappears, the selected country/
region type takes effect.
2.2.8 Setting the Date and Time
0011-1078
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Press the additional functions keys to display the user mode screen.
2) Select "4. TIMER SETTINGS" using the + or - key, and then press the OK
key.
3) Select "1. DATE&TIME SETTING" using the + or - key, and then press
the OK key. The set date and time appears.
4) Enter the current date and time by moving the cursor to the characters you
want to enter with the + and - keys.
5) Press the OK key to allow the entered date and time to take effect.
[2]
[1]