Service manual

Chapter 2
2-8
2.3 Checking the Connection to the Network
2.3.1 Checking the Network Connection
0011-1079
iR2016 / iR2020 / iR2016i / iR2020i
If the machine supports a network feature, check the network connection following the procedure below.
1) Press the following keys to display the service mode screen:
Additional Functions Key > 2 Key > 8 Key > Additional Functions Key
2) Select "# REPORT" using the + or - key, and then press the OK key.
3) Select "REPORT OUTPUT" using the + or - key, and then press the OK key.
4) Select "SPEC LIST" using the + or - key, and then press the OK key.
5) When "SPEC REPORT" is displayed, check that "BDL-IMAGE" is set to ON.
MEMO:
"SPEC REPORT"
- TOTAL MEMORY: 128MB
BDL-IMAGE (600) must be set to ON.
- TOTAL MEMORY: 256MB
BDL-IMAGE (1200) must be set to ON.
6) Contact the system administrator of the customer to make network settings.