Service manual

Chapter 2
2-13
F-2-43
10) Using the two supplied TP screws (M4x16), attach the card reader to the reader.
When tightening the screws, take care not to damage the repeating harness B.
F-2-44
11) Slide the card reader cover [1] to attach it to the card reader mount.
F-2-45
Route the repeating wire B [1] as shown below.
F-2-46
12) Using the supplied binding screw (M4x6), secure the card reader cover [2].
[1]
[1]
[1]
[1]