Service manual

Chapter 2
2-17
2.5 Installing the Heater PCB
2.5.1 Unpacking and Checking the Contents
0011-3362
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Prepare the following parts.
F-2-56
2.5.2 Preparing the Host Machine
0011-3363
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Before installing, make sure the host machine is turned off. If it is turned on, go through the following:
1. Turn off the main power switch.
2. Disconnect the power cable (from the power outlet).
3. Disconnect the power cable.
F-2-57
1) Open the front cover [1].
[1] Heater PCB unit 1 pc.
[2] Heater switch harness 1 pc.
[3] Cassette heater harness 1 pc.
[4] Heater PCB harness 1 pc.
[5] Clamp 4 pcs.
[6] Edge saddle (small) 2 pcs.
[7] Edge saddle (large) 1 pc.
[8] P screw (M3x8) 2 pcs.
[8][7][6][5]
[1] [2] [3] [4]