Service manual

Chapter 2
2-23
F-2-70
2) Remove the four screws [1], and then detach the rear cover [2].
3) Remove the five screws [3]. Remove the two hooks [4], and then detach the lower-right cover [5].
4) Remove the screw [6], and then detach the upper-right cover [7].
F-2-71
5) Remove the three screws [1], and then detach the rear-left cover [2].
F-2-72
6) Remove the core [1] and the flexible cable holder [2] at the back of the host machine. Disconnect the two reader flexible cables [3].
7) Disconnect the harness [4] from the four wire saddles [5].
8) Remove the two screws [6], and then detach the flexible cable cover [7].