Service manual

Chapter 2
2-33
F-2-93
When installing the cassette heater unit, make sure that harness is not pinched.
2) Secure the cassette heater [2] using a screw [1].
3) Connect one harness [3] to the cassette heater harness [4].
4) Place the other harness [5] at the position shown below. Connect this connector to the heater of the cassette when connecting the cassette heater to the cassette
at the second or lower stage.
F-2-94
5) Attach the rear cover. (4 screws)
6) Turn on the main power switch of the host machine.
7) Turn on the heater switch [1] and make sure that the cassette heater is powered.