User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Specifying Copy Settings
3-16
Customizing Settings
3
4
Press [ ] or [ ] to select ‘OFF’, ‘COLLATE’, or ‘STAPLE’
➞ press [OK].
If you do not want the machine to collate automatically, select ‘OFF’.
If you want the machine to collate automatically, select ‘COLLATE’.
If you want the machine to staple automatically, select ‘STAPLE’.
The selected mode is set, the LCD display returns to the <STANDARD
SETTINGS> menu.
NOTE
•
When the optional FInisher-U1 is attached, the Collate mode automatically
changes to the Offset Collate mode.
•
‘STAPLE’ is available only when the optional FInisher-U1 is attached.
5
Press [Stop] to return to the Standby display.
Standard Two-Sided Copying
You can set the standard Two-Sided mode.
NOTE
The default setting is ‘OFF’.
1
Press [Additional Functions] ➞ open the <COPY
SETTINGS> menu.
If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,”
on p. 3-5.
AUTO COLLATE
OFF