User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Specifying Copy Settings
3-26
Customizing Settings
3
Frame Erase Width Unit of Measurement
You can set the unit of measurement for the frame erase width.
NOTE
The default setting is ‘mm’.
1
Press [Additional Functions] ➞ open the <COPY
SETTINGS> menu.
If necessary, see the screen shots in steps 1 and 2 in “Image Direction Priority,”
on p. 3-5.
2
Press [ ] or [ ] until <MM/INCH ENTRY> appears ➞
press [OK].
The <MM/INCH ENTRY> menu appears.
3
Press [ ] or [ ] to select ‘mm’ or ‘INCHES’ ➞ press
[OK].
If you want to set the standard frame erase width in mm, select ‘mm’.
If you want to set the standard frame erase width in inch, select ‘INCHES’.
The selected mode is set, and the LCD display returns to the <COPY
SETTINGS> menu.
4
Press [Stop] to return to the Standby display.
COPY SETTINGS
6.MM/INCH ENTRY
MM/INCH ENTRY
mm