User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Flow of Copy Operations
1-6
Basic Copying Features
1
3
Press - [numeric keys] to enter the desired copy
quantity (1 to 99).
NOTE
For instructions on setting the number of copies, see “Specifying the Required
Number of Copies,” on p. 1-24.
4
Press [Start].
Copying starts.
IMPORTANT
You cannot change copy mode settings, such as the copy quantity, paper size, and
copy ratio while the machine is copying.
NOTE
•
If you place the original on the platen glass of the iR2016 model, or if the machine
cannot detect the original size, specify the original size after pressing [Start].
Press [ ] or [ ] to select the paper size
➞
press [Start].
•
If there is a job in hand, the machine scans the original, and waits to print it.
Printing starts when the current job is complete.
•
When the the message <MEMORY FULL> appears on the LCD display, do one of
the following:
- Divide your originals into several sets and copy them separately.
- Install an additional memory.
- If there are fax documents received in memory, print them out. (Only when the
optional Super G3 FAX Board-T1 is installed.)
0 9
100% AUTO A4
A TEXT
1O
SCANNING
ORIGINAL SIZE
A4