User`s guide

Placing Originals
1-16
Basic Copying Features
1
Feeder (DADF-P1)
You should use the feeder when you want to copy several originals at the same
time. Place the originals into the feeder and press [Start]. The machine
automatically feeds the originals to the platen glass and scans them. If you are
copying in the Two-Sided mode, two-sided originals can also be automatically
turned over and scanned as two-sided documents.
You can place the following originals into the feeder:
• Weight:
- 37 g/m
2
to 128 g/m
2
• Size:
- A3, A4, A4R, A5, A5R
• Tray capacity:
- 50 sheets (52 g/m
2
to 80 g/m
2
)
- 25 sheets (81 g/m
2
to 105 g/m
2
)
IMPORTANT
• Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon-backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals
• If the same original is fed through the feeder repeatedly, the original may fold or become
creased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times
(this number varies, depending on the type and quality of the original).
• If the feeder rollers are dirty from scanning an original written in pencil, clean the feeder.
(See Chapter 7, “Routine Maintenance,” in the Reference Guide.)
• Always smooth out any folds in your originals before placing them into the feeder.
• Set the originals one by one if they are very thin (37 g/m
2
to 51 g/m
2
) or very thick
(105 g/m
2
to 128 g/m
2
).