User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Reserved Copying
1-23
Basic Copying Features
1
1
Place your originals.
2
Set the desired copy modes and quantity (1 to 99).
3
Press [Start].
Scanning starts.
NOTE
If you place the original on the platen glass of the iR2016 model, or if the machine
cannot detect the original size, specify the original size after pressing [Start].
Press [ ] or [ ] to select the size
➞
press [Start].
4
Once the original is scanned, remove it from the machine.
NOTE
To cancel a reserved copy, see “Canceling a Copy Job,” on p. 1-19.
ORIGINAL SIZE
A4