User`s guide

Paper Selection
1-27
Basic Copying Features
1
NOTE
• The default setting is the standard paper size set in the <PAPER SELECT> menu. (See
“Paper Drawer Selection,” on p. 3-20.)
• You set activation or deactivation of the Auto Paper Selection for each paper drawer and
the stack bypass. (See Chapter 5, “Customizing Settings,” in the Reference Guide .)
• You can use the stack bypass for the Auto Paper Selection when:
- The paper is loaded in the stack bypass
- The paper size is specified in <BYPASS STD SET> in the <COMMON SETTINGS>
menu
- The Auto Paper Selection is set to ‘ON’ for the stack bypass in <COPY> in <AUTO
DRAWER SELCT> in the <COMMON SETTINGS> menu
1 Place your originals.
Make sure that <AUTO> is displayed. If not, press [Reset], or press
[Paper Select] repeatedly until <AUTO> appears in the LCD display.
<AUTO> and the size of the paper loaded in the Paper Drawer are automatically
selected according to the detected original size, are displayed on the LCD display.
NOTE
If the message <NO APPROPRIATE SIZE> appears, the paper set is different in
size from the original. Load the paper of the appropriate size indicated on the LCD
display in the paper drawer or stack bypass. If you press [Start] without loading
the paper, the machine automatically selects the paper with the narrowest margin,
and starts copying. (except when you are copying in the Different Size Originals
mode).
100% AUTO A4
A TEXT
O1