User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Collating Copies
1-44
Basic Copying Features
1
Page Order Collate
1
Place your originals.
2
Press / [Collate/Staple] repeatedly until the indicator
for the Collate function lights.
IMPORTANT
•
When the optional FInisher-U1 is attached, the Offset Collate mode is set
automatically.
•
The Offset Collate mode can be set only with the optional FInisher-U1 attached.
NOTE
When <AUTO COLLATE> is set to ‘COLLATE’ or ‘STAPLE’, the Collate (Offset
Collate with the optional FInisher-U1 attached) or Staple mode is automatically set
when you place the originals into the feeder. (See “Auto Collate,” on p. 3-15.)
3
Press - [numeric keys] to enter the desired copy
quantity (1 to 99).
NOTE
For more information about entering the copy quantity, see “Specifying the
Required Number of Copies,” on p. 1-24.
0 9
100% AUTO A4
A TEXT
O5